diff --git a/tools/mgmt-tester.c b/tools/mgmt-tester.c
index 5984d09..790426a 100644
--- a/tools/mgmt-tester.c
+++ b/tools/mgmt-tester.c
.expect_hci_len = sizeof(set_connectable_off_scan_enable_param),
};
+static const struct generic_data remove_device_success_3 = {
+ .setup_settings = settings_powered,
+ .send_opcode = MGMT_OP_REMOVE_DEVICE,
+ .send_param = remove_device_param_1,
+ .send_len = sizeof(remove_device_param_1),
+ .expect_param = remove_device_param_1,
+ .expect_len = sizeof(remove_device_param_1),
+ .expect_status = MGMT_STATUS_SUCCESS,
+ .expect_alt_ev = MGMT_EV_DEVICE_REMOVED,
+ .expect_alt_ev_param = remove_device_param_1,
+ .expect_alt_ev_len = sizeof(remove_device_param_1),
+ .expect_hci_command = BT_HCI_CMD_WRITE_SCAN_ENABLE,
+ .expect_hci_param = set_connectable_off_scan_enable_param,
+ .expect_hci_len = sizeof(set_connectable_off_scan_enable_param),
+};
+
static const uint8_t remove_device_param_2[] = {
0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc,
0x01,
};
static const uint8_t set_le_scan_off[] = { 0x00, 0x00 };
-static const struct generic_data remove_device_success_3 = {
+static const struct generic_data remove_device_success_4 = {
+ .setup_settings = settings_powered,
+ .send_opcode = MGMT_OP_REMOVE_DEVICE,
+ .send_param = remove_device_param_2,
+ .send_len = sizeof(remove_device_param_2),
+ .expect_param = remove_device_param_2,
+ .expect_len = sizeof(remove_device_param_2),
+ .expect_status = MGMT_STATUS_SUCCESS,
+ .expect_alt_ev = MGMT_EV_DEVICE_REMOVED,
+ .expect_alt_ev_param = remove_device_param_2,
+ .expect_alt_ev_len = sizeof(remove_device_param_2),
+ .expect_hci_command = BT_HCI_CMD_LE_SET_SCAN_ENABLE,
+ .expect_hci_param = set_le_scan_off,
+ .expect_hci_len = sizeof(set_le_scan_off),
+};
+
+static const struct generic_data remove_device_success_5 = {
.send_opcode = MGMT_OP_REMOVE_DEVICE,
.send_param = remove_device_param_2,
.send_len = sizeof(remove_device_param_2),
test_bredrle("Remove Device - Success 2",
&remove_device_success_2,
setup_add_device, test_command_generic);
- test_le("Remove Device - Success 3",
+ test_bredrle("Remove Device - Success 3",
&remove_device_success_3,
setup_add_device, test_command_generic);
+ test_le("Remove Device - Success 4",
+ &remove_device_success_4,
+ setup_add_device, test_command_generic);
+ test_le("Remove Device - Success 5",
+ &remove_device_success_5,
+ setup_add_device, test_command_generic);
return tester_run();
}